Latest activity

Actually the small wire ring is suppose to slip over the fuel line install the fuel filter and then slip the wire ring down over the...

Paint the white one black. Gently scuff it with a green pad. Hit it with a plastic primer. Lay on some plastic black base color. It...

May sound a little silly but if none of the other ideas have not worked for you, check gas cap to make sure it is vented properly. I had...

It's been my experience, the best way for me to get the line into the tank, is to cut a long taper in the line end and start it into the...

My ZT HD 60 did the same thing, down to the same side. I replaced the damper and that solved it. It had just grown weak.

Mark, this rug has been beat many times, I think I can say we all fight this issue and many of us have tried it all. I use (EZ-Slide...

thanks anything to increase knowledge is always useful

This is where someone is making their own copper gasket, rather than the spray type out of using Permatex copper.

all your safety switches tested to show current going through them, Joe

thank you that's just what i needed.

I am sure you have a good reason to want to change like it might be a free motor but you're going to have issues, possible with the...

Glue silica gel packets under your deck. 🤣

This maybe the closest you will find a diagram from MTD/SBD in some cases. But you can go find a similar Troybilt, Cub Cadet, Etc...

How hard is it to replace the brakes or what stops the riding mower when you press the clutch brake? The one seems to roll passed the...

I'm betting on a fuel cap vent with asthma.