Latest activity
-
JJohner reacted to Skippydiesel's post in the thread What is the Purpose of Each of These Items? with
Like.
Agreed! :devilish: -
BGet yourself an inline spark tester and the next time it happens install the tester and check for spark. I suspect you will find no...
-
Iintruder1500 reacted to good neighbor's post in the thread Lawnboy gold pro series 6.5 Dura Force engine with Like.
Sorry, I'm around Pittsburgh, PA. Thanks for responding.
-
XX580 replied to the thread How to stop cut grass blades from accumulating inside mower cavity?.Question: any chance THE BLADE on Honda is MULCHING (contoured) DESIGN and blade on Ego is NON-MULCHING (“straight”)? And, both...
-
Ffarmerdave1954 reacted to Tiger Small Engine's post in the thread Engine shakes while engaging blades with Like.
Artificial intelligence gives answers based on what a person has fed the program with information. Artificial intelligence is already...
-
BWorking on a JD LX 277/ MOL277C061290 with Kawasaki Code FH500V-BS11: Owner was mowing when the fuel line from the fuel pump (or from...
-
Bbentrim replied to the thread Engine shakes while engaging blades.Blown head gasket a common problem on Breaks & Scrapem singles especially the 28 and 31 cube engines. Some overeducated engineer thought...
-
Bbentrim replied to the thread M-ZT 52 Stops running when hot!.When it shuts down have you checked the antifire solenoid (if it has one) in the carburetor bowl? Sometimes when they get hot they will...
-
LPull fuel line off AT carb inlet. See what you get when cranking the engine. Even better, crank/pump into a glass jar and look for...
-
LGet yourself an inline spark tester and the next time it happens install the tester and check for spark. I suspect you will find no...
-
LTaryl made a video explaining the coil tester types. He said and I agree, the light bulb type does not give the full picture of coil...
-
LI see I no need for the average DIY guy to purchase one of the expensive testers, which he will use as once or twice. I’ve used the...
-
LFor both coils to fail at the same time is highly unlikely. Usually, a reduction in power is quickly noticed, but not a total shutdown...
-
HSeems like the deck belt is shaking really bad. Check the V pulleys for something stuck in the groove, or check the deck belt for an...
-
CIt will be find to run the deck without blades, But I would start by making sure the motor mount bolts are tight. only takes 1/8 turn...