Latest activity

The little cable assembly is for grabbing the hose end once it is forced through the tank grommet, that way the filter can be put on the...

I haven't heard of this problem on a Husqvarna but it fairly common on the Cub Cadet lawn tractors. The vent on the fuel cap may be...

The gas cap vent stopped up. It's rare, but I have seen it happen a few times. Also, when it quits, pull the plug wire and check for...

Artificial intelligence gives answers based on what a person has fed the program with information. Artificial intelligence is already...

It will be find to run the deck without blades, But I would start by making sure the motor mount bolts are tight. only takes 1/8 turn...

new carb and no dirt or restriction as I replaced all lines from the tank and filter with fuel flowing freely. It appears to hiccup or...

May sound a little silly but if none of the other ideas have not worked for you, check gas cap to make sure it is vented properly. I had...

Briggs and Stratton 31P677-3373-G2 <--- for this engine I see #54 as being the intake manifold bolts. And that is #54 in the diagram...

have a pressure washer with a honda gc160 a dhaf ( gcaha-1511401) when started it runs at full speed , can slow speed manually will not...

resolved the issue aagain thanks

Buy the proper OEM belt.

You need to read the pto clutch amps. Do you have a ammeter? or install a 10 amp fuse or ckt breaker in the electric clutch ckt. You can...

Please explain.........

There is more to it than seeing a spark inside a plug. The below type is the best. Lets you adjust the gap to make sure the coil is...

here's the video new head gasket so it's just idling although it does cut but I need to get it really cleaned up better than what it is...