Latest activity

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Make sure the idler arm return spring is in place as help to engage the spindle pulleys brakes when the PTO is disengaged. Also check...

Ever had a case where all the engines were working one day then after a storm have 5 coils failures the very next day? So glad they...

Sounds like the governor spring is either wrong, or installed wrong. 4800 should be out of the range of adjustment. I'd look over the...

If you've failed to maintain the under side as i do and it's dried , mow wet grass for a couple hours to soak the dry then a water hose...

Hey you all this year has been a coil changing year and replacement coils are what I have noticed not what they used to be, I ordered...

Or a "Mr Funnel " combination funnel & filter that will also remove any free water in the fuel. Mr Funnel comes in various sizes. For...

I almost never wash my mowers/decks. I use high pressure air to remove chaff (wet & dry). Why? Simple, wet vegetative matter starts to...

Clean the underside really well and use PAM cooking spray each time after it is cleaned and dried

A piston stop will not screw up the piston. I use one all the time. What will screw up the piston is forgetting the stop is in the spark...

Don't buy anything from the store. Take your used motor oil and an old paint brush. Slather the underside of the deck. Park it on some...

I have a GENUINE Hoda GX200 with a GENUIUNE Keihin carburetor that I need to do a thorough cleaning on. I have B&S 19061 and 19062...

It also doesn't help when they show illustrations with diagram numbers that are not used.

I posted thhis and within 5 minutes I found what I needed at Kohler. They provided me with a download link for the complete service...

Hey guys. I had the oem mulching kit on my mower than swapped out with a Gator Single Blade mulch when my blades were worn out. Well...