Latest activity

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Someway the bolt holding the choke lever, with all the springs attached came loose on my SV730 3043. After 3 days of searching I have...

Hi bartles, Sounds like he was familiar with only one example, and he does not work on enough of these engines to know there are...

Admittedly he doesn't get too close to a tool box.

Hi bartles, Sounds like he was familiar with only one example, and he does not work on enough of these engines to know there are...

Unplug the PTO from the harness, then check to see if it will keep running. This favors a safety switch issue. The PTO clutch diode is...

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Check blade brakes.

Make sure the idler arm return spring is in place as help to engage the spindle pulleys brakes when the PTO is disengaged. Also check...

This is one of those "urge to kill" deals....as it turns out the guy told me he thought it had another spring(besides the governor...

You must of missed something in the belt routing or a pulley has fallen off.

Don't buy anything from the store. Take your used motor oil and an old paint brush. Slather the underside of the deck. Park it on some...

Yes i see that

Thanks Doc. I am hoping to find something that may last for a while not sure if it is a product out there that will do that. I am not...

Had the similar problem on my S110 rear wheel. Did the soap bubble trick & even submerged it in a metal wash tub. No apparent leak. Put...