Latest activity

???????????????????????????????????????

Have you determined what the fix is ? Thanks

Thanks for the encouragement for the OP . Everyone could use a little of that , even Seniorcitizen.

yes sea foam is some good stuff

To save yourself from complaining about the next battery failure in 13 months, go to Walmart and buy you a Battery Tender Jr. Keep it...

Trashing the motor. Bought new JD 54" cut. Might buy new motor to replace trashed motor and use old mower for backup mower.

I had an issue with a name brand starter solenoid years ago. I purchased a box of 5 of this solenoid from my parts distributor. Every...

whynot, could you post a photo of the mower, even one maybe to routing of the deck belt on the mower, gosh there is enough of us skilled...

Turned out to be two bad solenoids. The new one wss also failing to.engage. As soon as I replaced it with another one it started...

whynot, could you post a photo of the mower, even one maybe to routing of the deck belt on the mower, gosh there is enough of us skilled...

Check the spindle to the blade that's not cutting correctly. Over the years, I've had several that wouldn't spin full speed just before...

✅ Thanks. I'll get it disassembled then go from there.

Gotcha. I think I had one like that on a LT1045??? I never did figure out how to remove the bearings. Good luck!

You cannot remove the bearings without damaging them. Only possible way would be to put the spindle in a press and then may sideload...

It appears that you need remove the spacers on each end. Then press out #10 spacer using a driver that slightly under under 30mm OD in...