Latest activity

"I just need this sharpened"

Put vac gauge on suck port, should have -1.5 reading red side, put gauge on push port going to carb should have +1.5 reading green side...

Put vac gauge on suck port, should have -1.5 reading red side, put gauge on push port going to carb should have +1.5 reading green side...

Some starters have metal pinion gear option, but it has to have the correct tooth count. The other suggestion is to replace the entire...

Ok, from what you say the carb needs to removed and cleaned the correct way, with a ultrasonic cleaner, I use it every time with lean...

If these test show positive you have a defective fuel solenoid or fuel clog from fuel supply ( the fuel tank) to the fuel pump.

You can test the fuel pump. The suck side should have 1- 1/2 neg vacuum. Out side to carb should have 1-1/2 psi. You can check these...

I have a bad scar in my shin caused by a push mower blade fragmenting like one of these shown. People don't realize that checking and...

Yeah I have yet to see anything as reliable or with the kind of lifespan of a snapper on the market today. After the oil pan filled...

Looks like a Toro model 22621 commercial unit. Most the these units came with a 4-cycle engine. Very reliable units and the engines...

No broken spindle housings. She said she hit a stump.. I don't think there was a stump involved. I think the worse of the 3 blades came...

These were commercial trim mowers back in the day. Is this a 2-stroke or 4-stroke model?

I'm curious if the deck also broke some of aluminum spindle housings.

I don't see anything wrong with them with my eyes closed.

Thanks Star Tech, I managed to play with the settings a little and got a more legible copy from the link you sent.