Latest activity

OP says 60 inch deck and strip is on right side.

Picked up a 1984 Toro TV 5004 Bagger No discharge chute, But runs on starting fluid Anyone know what these are used for And is it worth...

Received this mower last week after the customer said she hit a stump and deck started making loud noises and was vibrating. I think...

You cannot remove the bearings without damaging them. Only possible way would be to put the spindle in a press and then may sideload...

Make and model of mower?

Thanks for getting back to me. I much appreciated. I took the number part number for the transmission and model that I have and I was...

Gotcha. I think I had one like that on a LT1045??? I never did figure out how to remove the bearings. Good luck!

That doesn't work on this type of spindle assembly. The bearings are not exposed inside the center channel / hollow of the spindle...

Watch the Taryl video that was posted on page 1. All your answers are there.

If you would take the time to look at the service manual I posted you would see all the different models of Toro and LawnBoy mowers...

serial number 316002515 is there other models drives that will match will match? the drive needs a new interior plastic gear that is...

It may not knock even if one rod is broke. And a missing push rod will prevent it from running on that cylinder. Intake push rod...

Should have done this straight away.... PULL valve cover, low and behold there is a problem Houston... thanks for all your great info...

Remove the spark plug and turn the engine over slowly by hand and see if that piston is going up and down. Remove the valve covers and...

OK, thanks.