Latest activity

so w/ top valve spring compressed I can adjust bottom an it doesn't matter what stroke piston is on ? thanks HLW49

I want to thank everybody that responded to my questions on my mower. When I get it fixed I’ll let you guys know. I’m going to yank that...

Thanks Star Tech, You are correct, a diode is a PN junction. I have mixed the terms up for years (not and engineer), but I know a...

Hi suppraman, Normally that solenoid has the shutoff pintle retracted when power is applied with the key on. Power turned off, the...

Thank you Senior Citizen. Knots

Likely a 42" deck with 2 Blades.

do you know the name brand of the mower and what is it called or a number of it, meaning like Cub Cadet, yellow horse, something to head...

remove the valve covers check to see if the push roads are seated in the cam area in the block.

It appears you have the Nikki carb which the jets inserted from the top of bolt in emulsion tube by both the tiny O ring that is on the...

I don't know the specifics on yours, but can't you take a long socket extension (for example) and put it through the hole on one bearing...

Did this problem just start happening, or has it always done this? -- If it has always done this, it could be a bad deck where one of...

I unplugged the fuel shutoff solenoid and it’s running better than its ever run. I know that’s only a temporary fix. The more I think...

Whack a chinese motor on it

Neither are very good running parallel to the slope. That's why manufacturers put recommendations in their owners manual.

I am with the upside-down blade or a loose blade