You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Z930a
- Thread starter Bigcat6
- Start date
More options
Export threadDepends on where it is leaking from https://partscatalog.deere.com/jdrc/sidebyside/equipment/27044/referrer/navigation/pgId/397612
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,943
Plastic welding
Most car smash repairs can do it now days or you can do it yourself with a hot air gun & some HDPE milk bottles.
Done about 20 or so to date, not particularly difficult .
However I would grab a couple of 4-5 gallon chemical bottles to practice on first , most of them are HDPE & around the same thickness as a mower fuel tank .
Most car smash repairs can do it now days or you can do it yourself with a hot air gun & some HDPE milk bottles.
Done about 20 or so to date, not particularly difficult .
However I would grab a couple of 4-5 gallon chemical bottles to practice on first , most of them are HDPE & around the same thickness as a mower fuel tank .