Repairs Z Force 48 won't move

[luv2sled]

Model 17AI5BHB010 quit moving. The hydraulic pump is not activating when the brake lever is released. Is there something I should look for before I take it into a repair shop? I am the mayor of a small town...with little tax base...and this is the mower that was purchased a few years back to mow our cemetery with. I had it tuned up at last month and thought it was ready to go for the year.

Is there a fuse that could have blown that activates the hydraulic pump? Possibly the switch went bad?

Any help would be greatly appreciated.

 

[Deerlane]

No Fuse.

Is both rear wheel not moving? If so it maybe the belt that drives the two hyd tranys. Look under the rear of tractor, above the PTO clutch. There is a 1/2" belt should be tight.

 

[luv2sled]

Yes, both rear wheels will not move. When the brake lever is released, you can not hear the hydraulic's activating like you could before. I will check the belt but just want to make sure that it is not activated electrically like the PTO is.

Thanks for your help!

 

[luv2sled]

Thanks for your help...did find that the belt slipped off. All is good now!