White lt-135 belt won't go on

B

ba_50

Well-Known Member
Joined
Jul 9, 2014
Messages
132
The belt still has an inch to go before getting around the drive pulley. The OP manual says it uses a 754-0371a belt. I think the belt is supposed to go on easily with the deck lowered.
 
ba_50 said:
The belt still has an inch to go before getting around the drive pulley. The OP manual says it uses a 754-0371a belt. I think the belt is supposed to go on easily with the deck lowered.
Click to expand...
No, when the deck is lowered, it tightens the belt!
Belts don't go on easy, if it's the right belt they are a tight fit!
 
Also you must remove the rear pulling tension spring for the deck. Item 8 in the following diagram.
lt-135 deck spring.JPG
 
Thanks for the quick reply. So what is the best way to get the spring back on?
 
Never mind. Used a screwdriver to pull it over and around. Thanks again
 
You must log in or register to reply here.
Back
Top