Export thread

wheel fell off

#1

D

dakotamanb

While mowing my front wheel collapsed.Its like the wheel is dangling on the mower where you ajust the height.It is aMurray selfpropelled#22617x92b? Thanks Tony


#2

midnite rider

midnite rider

dakotamanb said:
While mowing my front wheel collapsed.Its like the wheel is dangling on the mower where you ajust the height.It is aMurray selfpropelled#22617x92b? Thanks Tony
Click to expand...

Did the wheel break or the nut holding it on come loose? This model looks to be self propelled. You can find the parts for sell along with a diagram here at PARTS TREE .com


#3

D

dakotamanb

midnite rider said:
Did the wheel break or the nut holding it on come loose? This model looks to be self propelled. You can find the parts for sell along with a diagram here at PARTS TREE .com
Click to expand...

the spring clip on the wheel came off any idea on how to get it back on. thanks tony


#4

midnite rider

midnite rider

dakotamanb said:
the spring clip on the wheel came off any idea on how to get it back on. thanks tony
Click to expand...

If you mean the height adjuster it should bolt onto to the deck as seen in the diagram.


#5

D

dakotamanb

midnite rider said:
If you mean the height adjuster it should bolt onto to the deck as seen in the diagram.
Click to expand...

I think the part # is 011x16ma
:confused2:


#6

midnite rider

midnite rider

dakotamanb said:
I think the part # is 011x16ma
:confused2:
Click to expand...

That is correct. You can probably get the same size bolt at your local hardware store for less than a dollar. You may need to remove one from the other side to have an example for the size you need.


#7

midnite rider

midnite rider

You will probably also need the nut that the bolt threads into on the other side of deck which is 015X68MA. I believe this is the size of the nut 015x68 as well as the bolt size is 011x16. I am not sure of this maybe someone else can chime in on this. :confused2:


#8

midnite rider

midnite rider

midnite rider said:
You will probably also need the nut that the bolt threads into on the other side of deck which is 015X68MA. I believe this is the size of the nut 015x68 as well as the bolt size is 011x16. I am not sure of this maybe someone else can chime in on this. :confused2:
Click to expand...

In reality if you can find a bolt, lockwasher and nut that will fit close to the diameter of hole in height adjuster and deck and not extend out into path of mower blade you should be ok.


Footer Links 1

Top