I've got a 2008 Cub Cadet walk behind mover, Model 12AE18M3056 that has good tread on the front tires, but the wheel bearings (2 per wheel) are shot. They have a flange to butt them against the plastic wheel body, and the spindle fits through both inner and outer bearing before thre nut goes on the wheel. The wheel is part #634-04346, and I'd rather just replace the bearings than the whole wheel.
Can't find the bearing part number. Anyone got any clues?
#2
StarTech
Okay CC nor MTD sells these bearing separate. What is ID of the bearing and also what is OD of the bearing (not the flange) and I should be able to comes with a generic bearing part number. The following generic I have on hand here (ID x OD x Height). I am thinking that they are going to be the 1/2 ID ones. Any A&I dealer can get these for you.
Thanks StarTech! I'll need to take one of the bearings to Napa or some other store to get the ID and OD since I don't have a set of calipers. I'm guessing your correct as to the 1/2 ID ones you posted.
Update: I was able to get a set of calipers at NAPA and confirmed 1/2 ID and 1 1/8 OD for these wheel bearings. So al set from my end. StarTech led me down the right path -- thank you!
