I have a craftsman 3400 pressure washer w briggs an stratton motor an wanted to know about this white capped filler tube an what goes in.The top is odd.
There are already 2 yellow oil fill ports on it ,one on each side .
The top is wedged in a odd way that's different than the 2 yellow oil caps.Pic is being loaded.
What does the owner/operator's manual say they are ?
#4
StarTech
It is a plug for the optional oil fill/ dip stick tube. Only a few of these engine are used in a location that you don't have access to the regular fill ports so Briggs has this option for OEM that need it.
It is a plug for the optional oil fill/ dip stick tube. Only a few of these engine are used in a location that you don't have access to the regular fill ports so Briggs has this option for OEM that need it.
Either side
The engine maker has no control about what it is fitted to so they make provisions to check the oil from both sides as Star just told you .
Even then you come across tools where you have to remove belts or guards to get to the oil plug .
#8
Scrubcadet10
You could fill it from either one, all ends up in the same spot.
