Export thread

wacker concrete cut off saw

#1

dwelder

dwelder

I have a wacker concrete saw that was running one day and died. I put new spark plug, cleaned carb, cleaned magneto, and even tried starting fluid and it won't start. It's 2 stroke also. Do you think the coil is bad or what. Need help.


#2

K

KennyV

If it won't start or try to start with starting fluid...
You likely have an ignition problem, you need to start by looking for spark...
Could be the magneto coil or a kill switch/wire... or a couple other things, check for any spark first. :smile:KennyV


#3

Edwards saw service

Edwards saw service

KennyV said:
If it won't start or try to start with starting fluid...
You likely have an ignition problem, you need to start by looking for spark...
Could be the magneto coil or a kill switch/wire... or a couple other things, check for any spark first. :smile:KennyV
Click to expand...

I agree with Kenny. Also pop the muffler off and inspect the piston and cylinder, It may be scored and therefore compression is lost. Which is not starting is a symptom of.

Edwards Saw Service in Glen Mills PA


#4

S

Shackelchevy77

i recomend to anybody to buy a $5 spark tester from harbor fright or local store its a powerfull tool when used right


Footer Links 1

Top