i am trying to find the model and serial # on this tiller it need new belts i have looked
all over the machine for them but i did find some # on the left side of the tiller behind the tire
any info will help thank you
i am trying to find the model and serial # on this tiller it need new belts i have looked
all over the machine for them but i did find some # on the left side of the tiller behind the tire
any info will help thank you
Approximately how old is it? Does it say junior tiller on it, or are you guessing? Most of these tiller model numbers start with 2 numbers, then 2 letters.
Did some more checking and this might help you. Go to the website below, click on parts lookup, and use TroyBilt as brand and 15006 as model number. Let me know if this helps.
If you lok at two or three different models, I think you will find that most of the parts are the same.
#8
Flintmotorsports
so you think it is a good bet that the belts will fit most of them tillers? the customer wants to keep this out of the landfill and i enjoy fixing old machines thank you for the help
If you have the old belt, please measure it and post. I'm going to check to see if I have a TroyBilt cross reference guide. If you check different models on the Jacks website, I think many of them are the same.
#10
Carscw
What I do is take a old belt that I have cut in half and run it over all the pulleys mark it and you get your length.
Just make sure the belt is not wore out so you get your size right.
Sent from my iPhone using LMF
#11
Flintmotorsports
i checked jackes and most of them are the same and i will have to post size tomarrow morning will you check back then?
If you have the old belt, please measure it and post. I'm going to check to see if I have a TroyBilt cross reference guide. If you check different models on the Jacks website, I think many of them are the same.
Check all Juniors for which I can find records and there is a problem. They all call for both belts to be 1/2" wide. How sure are you of those belt measurements? Did you check the V-pulleys, were they two different sizes? Could someone have put on the wrong belt? What is your opinion?
#15
Flintmotorsports
someone could have put on the wrong belts i guess what size belts does it call for?
The belt closest to the engine is part number GW-97075. Size 20.4 X .500.
The belt closest to the tynes is part number 190904. Size 23.8 X .500.
TroyBilt only lists only one belt out of the 530 on my list, that measures 26.5 X .375. That is part number GW-9095.
Now your belts could be stretched a little but with what you are telling me I would not get either one with out a good mechanic taking a closer look at the routing and tensioner. You might be throwing money away, as most places do not allow you to return belts. Sorry I couldn't find more information for you.
#17
Flintmotorsports
ok well thank you for trying i will just deal with the local napa auto parts becaus you can return belt there if they are wrong thanks for the help
