Export thread

Troy-bilt pony issues when engaging PTO

#1

R

Rev7319

Troy-Bilt Pony (#13AN77TG766) 2007
Idles and runs great until PTO is engaged. When engaged it stutters dramatically and sometimes stalls. Eventually it starts to run/mow great given enough time. I always let it warm up for at least 2-3 minutes before I engage the PTO.


#2

Carscw

Carscw

Rev7319 said:
Troy-Bilt Pony (#13AN77TG766) 2007 Idles and runs great until PTO is engaged. When engaged it stutters dramatically and sometimes stalls. Eventually it starts to run/mow great given enough time. I always let it warm up for at least 2-3 minutes before I engage the PTO.
Click to expand...

Are you engaging the pto at a idle?


#3

R

Rev7319

Carscw said:
Are you engaging the pto at a idle?
Click to expand...
FAST(rabbit) throttle per instructions. As soon as it starts to stutter I disengage the PTO and the engine revs back up to normal.


#4

M

Mikel1

When it starts to stutter can you choke it some? If so does it help?


#5

R

Rev7319

Mikel1 said:
When it starts to stutter can you choke it some? If so does it help?
Click to expand...
Only thing that helps is dropping the speed to low or disengaging the PTO.


#6

M

Mikel1

If you take the belt that drives the blades off does it still happen while engaged?


#7

R

Rev7319

Mikel1 said:
If you take the belt that drives the blades off does it still happen while engaged?
Click to expand...
I'll check the belts and replay asap. Thanks for the reply.


Footer Links 1

Top