Export thread
Transaxle needs oil
#1
B
Ben M
B
Ben M
2014 Cub LTX 1050, (13W093AP010)
Tuff Torq 7A646084460 transaxle.
Is there any way to add trans oil to this axle, I have looked all over trans unit and I don’t see a traditional oil fill plug. I’m attaching a photo of what looks similar to an oil plug but, it looks like a jam nut with an adjuster in the middle. It’s on right side of housing under beneath fan pulley.
My questions:
1- So is this an OIL PLUG or an ADJUSTER with a JAM NUT on the back?
2- What weight oil would I replace it with if this is a fill port?
I found a puddle of oil that looks like it leaked out of the right side of axle where maybe there’s a bad oil seal. The forward and reverse pedal does not respond as it should.
Tuff Torq 7A646084460 transaxle.
Is there any way to add trans oil to this axle, I have looked all over trans unit and I don’t see a traditional oil fill plug. I’m attaching a photo of what looks similar to an oil plug but, it looks like a jam nut with an adjuster in the middle. It’s on right side of housing under beneath fan pulley.
My questions:
1- So is this an OIL PLUG or an ADJUSTER with a JAM NUT on the back?
2- What weight oil would I replace it with if this is a fill port?
I found a puddle of oil that looks like it leaked out of the right side of axle where maybe there’s a bad oil seal. The forward and reverse pedal does not respond as it should.
#2
M
mechanic mark
tufftorq.ordertree.com
tufftorq.ordertree.com
Give Tuff Torque a call in the am with complete Model # & see if they can help you.
M
mechanic mark
Home Page - OrderTree
tufftorq.ordertree.com
Tuff Torq Ordertree |
tufftorq.ordertree.com
#3
StarTech
StarTech