silverstatefr
Forum Newbie
- Joined
- Mar 26, 2018
- Threads
- 1
- Messages
- 8
Hi everybody,
first excuse my poor english,
My wheelhorse started perfectly, but when I engaged the clutch last saterday it was OK for 30 seconds or 1 minute. After that I lost the cutting function. The engine always ran until I stopped it. I saw that the fuse directly behind the ignition switch (main wire) was cut. I have a short circuit even in the stop position (a new fuse goes red). I do not see the relation with the clutch. Maybe it's normal. It is impossible to start now. I don't understand the function of the diodes on the electric diagram or why a 7.5A fuse on the light circuit? Could be the cause? Could someone explain to me. Or if you have an other idea to check. I checked the ignition switch but it is OK. Could the coil (magneto) be the cause?
Thank you. I appreciate a lot my tractor and would like to keep it again.
Silverstatefr
first excuse my poor english,
My wheelhorse started perfectly, but when I engaged the clutch last saterday it was OK for 30 seconds or 1 minute. After that I lost the cutting function. The engine always ran until I stopped it. I saw that the fuse directly behind the ignition switch (main wire) was cut. I have a short circuit even in the stop position (a new fuse goes red). I do not see the relation with the clutch. Maybe it's normal. It is impossible to start now. I don't understand the function of the diodes on the electric diagram or why a 7.5A fuse on the light circuit? Could be the cause? Could someone explain to me. Or if you have an other idea to check. I checked the ignition switch but it is OK. Could the coil (magneto) be the cause?
Thank you. I appreciate a lot my tractor and would like to keep it again.
Silverstatefr