Export thread

Toro Timemaster 30 - bad piston and cylinder

#1

S

sibertj

on my 3rd summer with the time master 30 and have not had any of the reported issues yet. However, the piston has gouged the cylinder wall and both will need to be replaced. I have opened up the engine and know what is needed, however, I cannot find any location online that sells the parts...as well, I cannot find a cross reference to let me know which B&S engine model this mower is using.

Any help would be appreciated.


#2

I

ILENGINE

The briggs model number will either be on the engine blower housing or stamped into the valve cover if OHV. Most likely you will need a short block. or before buying the short block check into complete engines. Sometimes the engine can be cheaper than the shortblock.


#3

reynoldston

reynoldston

The last B&S that had a gauged cylinder wall I had the cylinder bored and installed a oversized piston. the whole job with parts cost me around 200 dollars and that was with new valves.


#4

S

sjessen

Isn't a new engine around $250-275?


#5

S

Streamlight

sibertj said:
on my 3rd summer with the time master 30 and have not had any of the reported issues yet. However, the piston has gouged the cylinder wall and both will need to be replaced. I have opened up the engine and know what is needed, however, I cannot find any location online that sells the parts...as well, I cannot find a cross reference to let me know which B&S engine model this mower is using.

Any help would be appreciated.
Click to expand...

2012 Toro Timemaster Engine: Briggs 121S02-0130-F1


#6

reynoldston

reynoldston

sjessen said:
Isn't a new engine around $250-275?
Click to expand...

Could well be, not worth rebuilding if that is the case. I didn't look up the prices of engines. I have even seen engines selling for 89 dollars in HF. The engine I rebuilt was for a special set up and the customer wanted it rebuilt. The OP can do as he wants, all I was giving was a different option.


#7

B

bobvail

Try Northern Tools. I purchased a brand new Tecumseh to replace worn out motor on my TroyBult Horse. That was years ago when the company was named Northern Hydraulics.


Footer Links 1

Top