toro proline 22026 w/ suzuki 2 stroke

jakewells

jakewells

Well-Known Member
picked up this mower off craigslist for 30.00 not running but does run on a prime the carb is gummed up it's going to need a complete fuel system serviced anyway and some pieces replaced can't seem to find much info on it. it is a cast aluminum deck with side discharge only and is extremely heavy as found out from loading the mower in my car :laughing:. it has a large gastank that is mounted separate from the engine.
it should be a nice mower when fixed i will post pictures in a few hrs.
 
With an aluminum deck and 2-cycle engine, it's actually (or should be) pretty light.

I have a similar model. Parts can be found but not easily and they are somewhat expensive. Yours is the professional model with a big fuel tank and probably has a blade clutch as well.

These engines are known for developing a 'Suzuki' knock. Yours may or may not do this. If it does, it will sound like a horrible rod knock and that it's going to fly apart at any moment...but it won't. Mine's been knocking for at least ten years, maybe more. Nobody seems to know for sure what causes it.
 
cpurvis said:
With an aluminum deck and 2-cycle engine, it's actually (or should be) pretty light.

I have a similar model. Parts can be found but not easily and they are somewhat expensive. Yours is the professional model with a big fuel tank and probably has a blade clutch as well.

These engines are known for developing a 'Suzuki' knock. Yours may or may not do this. If it does, it will sound like a horrible rod knock and that it's going to fly apart at any moment...but it won't. Mine's been knocking for at least ten years, maybe more. Nobody seems to know for sure what causes it.
Click to expand...

C'mon purvis, you know damned well what it is, ....fess-up, tell him !! It's those pixies wreaking havoc !

PIXIES C.jpg
 
That's as good of a guess as I've gotten so far.

Seriously, I wish I knew what causes that knock. I'd be glad to share it.
 
cpurvis said:
With an aluminum deck and 2-cycle engine, it's actually (or should be) pretty light.

I have a similar model. Parts can be found but not easily and they are somewhat expensive. Yours is the professional model with a big fuel tank and probably has a blade clutch as well.

These engines are known for developing a 'Suzuki' knock. Yours may or may not do this. If it does, it will sound like a horrible rod knock and that it's going to fly apart at any moment...but it won't. Mine's been knocking for at least ten years, maybe more. Nobody seems to know for sure what causes it.
Click to expand...

mine doesn't knock and doesn't have a blade clutch.
 
ran it for an hour but no i have not mowed with it yet since the grass wont be growing till april.
 
I've got the same mower and its awesome i use it for tall wet or dry grass there should be a little guard over the discharge i took it out been a real work horse
 
You must log in or register to reply here.
Back
Top