Export thread

TB230 not running. Please Help.

#1

T

Tincup19

I had posted once before but didn’t get a whole lot of info. My Troy Bilt TB230 won’t run correctly. If I get it to start it just sputters. I’ve taken the carb apart 3 different times and cleaned it. Everytime immediately after cleaning everything it runs normal for 5 or 10 seconds and goes back to sputtering again. The thing is I’m really good condition otherwise but I’m ready to throw it in the dumpster.


#2

Scrubcadet10

Scrubcadet10

Have you verified good fuel flow to the carb? either the fuel line is collapsing internally or the gas cap vent is plugged. It may also be valve clearances out of spec.


#3

T

Tincup19

Well not sure what all of that entails but the float bowl is filled normally everytime I take the carb apart to clean it. And Ive tried opening the gas cap when it’s sputtering but still nothing. Dumped the gas and oil and put in new still nothing.


#4

R

Rivets

Would you post the model number off the black and silver tag so we know exactly which engine you have?


#5

T

Tincup19

12AVB2A3711


#6

R

Rivets

Sorry, but I thought I could get the engine model using the mower numbers. TroyBilt doesn’t always provide info on their website. Can you please post all numbers you can find on the engine. Need to know if you have a Briggs or a clone. Thank you.


#7

T

Tincup19

According to the cover it is a Briggs 725exi if that sounds right?


#8

R

Rivets

I need the model numbers, not series numbers, which are on the engine. Just got called to work, be back later today.


#9

dougand3

dougand3

There is an engine # somewhere - valve cover, shroud, block. If Briggs - eg: 12S912-1234-E1. then code eg: 09111701


#10

T

Tincup19

8F3C2F66-314B-426A-AC2F-EE1C02D320A4.jpeg
the picture won’t rotate but it looks like the model number is 104M020004F1. Is this what I’m looking for?


#11

dougand3

dougand3

Yes, that's the engine model #.


#12

R

Rivets

When you removed the carb and cleaned it, did you remove the white Main Jet assembly? Most likely your problem is a clogged main jet. If you just want to replace it the part number is 594060 And costs about $10.00.


#13

T

Tincup19

Yea I took the whole thing apart. Although I just bought the carburetor last year I’m starting to think it’s somewhere in the carb. I cleaned it again today and now it won’t even start at all. Maybe time to buy another carb and waive the white flag.


#14

B

bertsmobile1

Yes than you
Model 104M02
Code 0004-f1


Top