Swapping a kohler for a Briggs on my cub

[Hawkshoe]

I've got a Briggs 407777 0124 e1 I am putting in my cub rider.
Need to know what the 2 sets of wires coming out of the Briggs are so I can figure where to land them. One is red black. The other is black white. Thanx matt.

 

[BriggsStratton]

Hello Hawkshoe!

Here is an illustrated parts list for the 407777 0124 E1 mode, http://bsintek.basco.com/BriggsDocumentDisplay/18jvBJXNnfBhU7y.pdf. Please let us know if you have additional questions. We're happy to help. Feel free to reach out on Twitter (@BriggsStratton), too!

-Team Briggs

 

[Hawkshoe]

Thank you for the info. I need to know what each wire does so I know where to connect them to my harness. I know one black comes from both coils so I am assuming that gets hooked up to the solenoid to charge the battery?? Not sure what to do with the others. Thank you.

 

[BriggsStratton]

Not a problem! Here is a link to our wiring diagrams and FAQ:

Electrical Schematics & Wiring Diagram | Small Engine Specs | Briggs & Stratton FAQ

That should be all the info you need to hook up your new Briggs & Stratton! Rev on!

-Team Briggs

 

[Hawkshoe]

This should do it. Thank you!!!!

 

[BriggsStratton]

You're very welcome! Please let us know if you need anything else. We're very active on Facebook & Twitter and are always happy to help.

-Team Briggs

 

[Hawkshoe]

I must be in over my head. I am rewiring this tractor and need to know where to land these wires coming out of the motor. Which one do I attach to the solenoid so the battery will recharge? Which is the fuel solenoid wire and where do I land it.
Thanx again!