sno throw

exotion

Lawn Addict
Joined
Jun 24, 2012
Threads
66
Messages
3,444
I got a free ariens sno throw with a tecumseh
H60 engine for free it was beat to hell I had to completely replace the.carburetor because the rod holding the float was stuck and I could not take it off. Also replaced starter spring, fuel lines, spark plug, and engine oil and that got it running I cannot find a model num on the machine so I have a couple questions
1) where is model for machine typically placed?
2) the augur looks to have a reservoir with some kind of fluid in the middle I am wondering what goes in there as I would like to replace
3) I would like to service the self drive but I haven't dug that deep yet what am I going to find and need to replace.

Basically this machine runs drives and spins augurs so I can use it if the snow gets to deep for my Honda single stage but I want all my machines tip top shape and I want to replace anything that gets worn down
 
Joined
Jun 8, 2012
Threads
321
Messages
6,749
1) where is model for machine typically placed?

A lot of machines have it on the back (see picture):

ariens-snow-blower.jpg

(http://www.rcpw.com/rip/images/posts/locator/ariens/ariens-snow-blower.jpg)
 

exotion

Lawn Addict
Joined
Jun 24, 2012
Threads
66
Messages
3,444
So the.model sticker is.missing ill post a couple pic it is a tecumseh h60 engine on a ariens sno throw need oil capacity of engine, type of oil/grease for augur and how to service transmission
 

Attachments

  • ForumRunner_20131117_111114.png
    ForumRunner_20131117_111114.png
    378.4 KB · Views: 10
  • ForumRunner_20131117_111128.png
    ForumRunner_20131117_111128.png
    353.4 KB · Views: 5
  • ForumRunner_20131117_111219.png
    ForumRunner_20131117_111219.png
    292.4 KB · Views: 5
Top