My PTO disengages while cutting and i turn off and then back on the PTO switch and it engages for awhile. new PTO switch has not solved the issue. Any suggestions, thanks
My PTO disengages while cutting and i turn off and then back on the PTO switch and it engages for awhile. new PTO switch has not solved the issue. Any suggestions, thanks
PTO will only dissengage if
1) it gets too hot
2) voltage drops below 10V
3) momentary break in either + or - wire
4) one of the safety switches is faulty or there is a short in one of the safety circuits wires.
PTO will only dissengage if
1) it gets too hot
2) voltage drops below 10V
3) momentary break in either + or - wire
4) one of the safety switches is faulty or there is a short in one of the safety circuits wires.
