Export thread

Scat Turf Tiger 61" blades are hitting each other

#1

M

maverickpo

Just changed blades to new ones ..hear 2 of them periodically hitting each other..checked old blades I took off ..shows where 2 blades were hitting each other.
One spindle is wobbly ...would that make this happen?
Ordered spindle for it today..hope that cures problem.
Any advice would be appreciated.
Thx:
Harold


#2

Z

zmister11

maverickpo said:
Just changed blades to new ones ..hear 2 of them periodically hitting each other..checked old blades I took off ..shows where 2 blades were hitting each other.
One spindle is wobbly ...would that make this happen?
Ordered spindle for it today..hope that cures problem.
Any advice would be appreciated.
Thx:
Harold
Click to expand...

I doubt it, but does your mower have timed blades? My old John Deere walk behind did. And every 30 hours I had to adjust the timing.


#3

M

Mad Mackie

Scags don't have timed blades that I know of. A bent spindle shaft could cause the blade contact. Make sure that you have the correct blades.


#4

B

bertsmobile1

Mad Mackie said:
Scags don't have timed blades that I know of. A bent spindle shaft could cause the blade contact. Make sure that you have the correct blades.
Click to expand...

Bent spindle
Bent deck where spindle bolts down
cracked deck where spindle bolts down
broken mounting bolts on spindle housing
Collapsed spindle bearings


#5

C

clay45

Lay down beside your deck (mower turned off, key in your pocket) and spin the blades by hand noting all contact points. Maybe its not hitting another blade but some point on the underside of the deck.


#6

Micah Haarhoff

Micah Haarhoff

clay45 said:
Lay down beside your deck (mower turned off, key in your pocket) and spin the blades by hand noting all contact points. Maybe its not hitting another blade but some point on the underside of the deck.
Click to expand...

Clay45 is right maybe the aren't hitting your blades. your deck could be bent.


#7

M

maverickpo

Changed one spindle out....cured problem ...thx to all for your help..


Footer Links 1

Top