I recently bought a used Scag TT and I just noticed that the check engine light stays on when the key is switched to the on position, until the engine fires up, then turns off. Is that normal? Everything seems to be running fine. Model Number is STT61V-31EFI has the Kohler LH775-3015 Engine. Also, is there any available reference material for the engine light codes? The Operators manual says this about the light and nothing more:
"Check Engine Light (Figure 4-1).16. Indicates the operation of the engine sensors on the Kohler Electronic Fuel Injection (EFI). Light will flash once at initial start up. If a problem occurs with a sensor on the engine, the light will flash a code. See your authorized Scag Dealer for diagnosis and repair."
I can not find any info about light patterns at all for any scag.
Brian
"Check Engine Light (Figure 4-1).16. Indicates the operation of the engine sensors on the Kohler Electronic Fuel Injection (EFI). Light will flash once at initial start up. If a problem occurs with a sensor on the engine, the light will flash a code. See your authorized Scag Dealer for diagnosis and repair."
I can not find any info about light patterns at all for any scag.
Brian