Export thread

Hey guys I have 2 question for you.

-Does the 24x12x12 Have tubes in rear tires?

-If the rim has a big bend in it. can you knock it back straight???

Thanks so much,

Not too sure about the tubes but I hammered out a lot of rims as long as their steel rims they held
air just fine....cubby

You an put tubes in them... but generally they will be tubeless.

Depending where it is bent, you can almost always straighten a bent mower/tractor wheel... :smile:KennyV

You should be able to tell if it has a tube by looking at the valve stem, if the stem is almost the same diameter all the way to the wheel it has a tube, if it seems to get much wider at the wheel then it is tubeless.

Thanks so much. Changing the tires were easy. Thanks to an automotive tire machine.