Export thread

RZT S mower

#1

R

raisincain

Couldn,t find the answer, When I push the reverse lever it shuts off the PTO. I know it,s a safety feature. How do I by pass that?


#2

txzrider

txzrider

it has been posted that you can disconnect the connector at the bottom of the switch, I dont remember it if had to be jumpered.


#3

lawn mower fanatic

lawn mower fanatic

I moved your thread to the Cub Cadet Forum. :smile:


#4

1

1894

The switch is right there by the reverse pedal . It is only held in place with one screw ( 1/4 " if I recall correctly ) Loosen that bolt with a wrench from the top , spin the button down so it doesn't contact the pedal , re-tighten the bolt. No need to unplug anything.


#5

R

raisincain

1894 said:
The switch is right there by the reverse pedal . It is only held in place with one screw ( 1/4 " if I recall correctly ) Loosen that bolt with a wrench from the top , spin the button down so it doesn't contact the pedal , re-tighten the bolt. No need to unplug anything.
Click to expand...

I found it 5/16. thanks


#6

1

1894

raisincain said:
I found it 5/16. thanks
Click to expand...

5/16 , I was close . It seemed , to me , to be a better choice than unplugging the wire and finding a home for the wire and taping up the plug on the switch .


Footer Links 1

Top