bullet bob
Well-Known Member
- Joined
- Nov 14, 2019
- Threads
- 23
- Messages
- 179
Turns out this project was a piece of cake. Took longer to get the tools out & put them away than the actual job. Was able to get the flat-blade screwdriver in the exposed 'head' & it popped right off. The tail end, which was not easily exposed and wasn't able to get the screwdriver in there, I just gave it a quick tap with a hammer & off it popped. Was able to open the grippers on each end when replacing, dab of grease, snapped back on. Steers like it was new again. Thanks for all your help!
Last edited:
