Export thread

My floatbowl and seals are busted.
Original replacement or parts and unavailable.
I have googled for 3 days.

Post all of the numbers from the ID tag so we can figure out what replacement parts you will need.

Number on the carb is 5035b7f.

Here are all replacements parts but half of them are not available i need the entire bottom end so might as well better replace the whole carb.

Looking at pictures all morning and it looks nearly identical to the 632795A minus the idle set screw
Some have it and some dont or the fuel intake is straight or at an angle...

I would check with your local repair shops, I’ll bet they have more than one used carb laying around you can scavenge parts off. Then purchase a kit 631021B from them and rebuild the carb.

No luck, 3 shops in the province and none have any used or new.
So ordered one from china, hope it arrives quickly.

Fish said:

Tecumseh Carburetor Bowls, Bowl Nuts, Floats & Float Pins

Tecumseh Carburetor Bowls, Bowl Nuts, Floats & Float Pins

www.milfordpower.com

Click to expand...

that site has nice choice and prices but but i live in belgium

How could anyone know this?
So you can only order from sellers in Belgium?

Fish said:

How could anyone know this?
So you can only order from sellers in Belgium?

Click to expand...

hah sorry i didnt say my bad.
no but that site does not have belgium as a shipping option

If the float bowl is the part you are needing, 95% of Tecumseh bowls are interchangeable.

128MB said:

hah sorry i didnt say my bad.
no but that site does not have belgium as a shipping option

Click to expand...

I haven't shipped anything to Europe for years, too many losses.

i ordered a aftermarket carb online and see if it work, seems like my only option. no stores here have tecumseh parts or its on order for weeks at €100 for an OEM one.
I need the entire bottom half, bowl, float, needle,seat, etc

I just got the brandless replacement for €20 and it just bolted in.
3 pulls , little adjustment of the main mix because it was coughing, jumped on and mowed 2 acre without on hiccup of the engine.
awesome.
rpm even sounds right, gonna check with the gauge tomorrow.