removing drive belt cover

P

Phil5

Forum Newbie
I have a 21" walk behind and I need to change the drive belt.I have removed the two shoulder bolts from the drive belt cover, but I can't see how to get the cover off. I have looked at many sites about changing the belt, but they only say "remove the cover." Do I need to remove the engine to remove the belt? (If I do, I might just stop right there.) Any help?
 
Phil5 said:
I have a 21" walk behind and I need to change the drive belt.I have removed the two shoulder bolts from the drive belt cover, but I can't see how to get the cover off. I have looked at many sites about changing the belt, but they only say "remove the cover." Do I need to remove the engine to remove the belt? (If I do, I might just stop right there.) Any help?
Click to expand...

pictures man! it helps alot
 
I have attached 4 pictures of the deck area showing the kind of belt cover. It is different from the one on the YouTube video from Troybbilt.
 

Attachments

  • 20130902_124309.jpg
    20130902_124309.jpg
    208.3 KB · Views: 3
  • 20130902_124319.jpg
    20130902_124319.jpg
    221.8 KB · Views: 3
  • 20130902_124332.jpg
    20130902_124332.jpg
    231.7 KB · Views: 3
  • 20130902_124343.jpg
    20130902_124343.jpg
    173.2 KB · Views: 2
you said you took the bolts out? well there are probably plastic tabs that is holding the thing attached.
 
I can;t find any tabs -- there are many bolts underneath, but I don't want to disassemble anything that shouldn't be taken apart. The parts diagram from TB isn't very clear as to how the parts go together.
 
You must log in or register to reply here.
Back
Top