Export thread

Possible death of a tranny

#1

R

rossfrank

Bolens 38" 6 speed model 13AM 762 F 765. The pulley on the transmission loosend up and sheard the star shaped holders off of tractor. I tried to remove the 7/8" nut that hold the pulley on but the entire shaft spins so I am unable to remove the pulley. Is the fact that the shaft is spinning mean the Tranny is tore up inside? Appreciate any feedback I can get. Lawns getting pretty tall


#2

Fish

Fish

No, rotate the shaft, and watch the wheel axles, with the f/w engaged in either direction.
Take the thing to someone with an impact wrench to remove the nut.


#3

Tiger Small Engine

Tiger Small Engine

Fish said:
No, rotate the shaft, and watch the wheel axles, with the f/w engaged in either direction.
Take the thing to someone with an impact wrench to remove the nut.
Click to expand...
If the pulley has spun and ruined the mount, get it welded, then you don’t have to go to more time, trouble and expense.


#4

ILENGINE

ILENGINE

Tiger Small Engine said:
If the pulley has spun and ruined the mount, get it welded, then you don’t have to go to more time, trouble and expense.
Click to expand...
Except when you need to replace the belts and you have to remove the pulley to get the belt off and back off because the edge of the pulley is jammed against the frame.


#5

S

slomo

Notch the frame then. Easy right?


#6

R

rossfrank

slomo said:
Notch the frame then. Easy right?
Click to expand...
Thanks for all the feedback guys. I ended up having to cut the nut off. Pulley has a hole in it about I don't know an inch round it's pretty much shot. Still hoping the tranny's okay.
Fish, I have the tractor in gear now that the pulley and everything's off. I could still spin the spindle the threaded rod coming out with my fingers. You still think that the tranny is okay in spite of me being able to do that? Thanks again guys.
Rossfrank
Tiger Small Engine said:
If the pulley has spun and ruined the mount, get it welded, then you don’t have to go to more time, trouble and expense.
Click to expand...


#7

Fish

Fish

When you rotate the top shaft, and it is either in forward or reverse, the wheel axles should slowly turn. tranny.jpg


#8

Fish

Fish

It looks like the pully comes with the hub, so you would just need to add the nut.

Pulley-v W/hub 956-04002 - OEM MTD - eReplacementParts.com

Buy the official MTD Pulley-v W/hub 956-04002 replacement - Use our model diagrams, repair help, and video tutorials to help get the job done.
www.ereplacementparts.com www.ereplacementparts.com


#9

Fish

Fish

The pulley rounding off it fairly common problem.


#10

R

rossfrank

Fish said:
The pulley rounding off it fairly common problem.
Click to expand...


#11

R

rossfrank

does anyone know if the 9/16" nut is 18 thread per inch? I have to run a die over it.


#12

B

Bolens05

guys Hi glad to find this forum! I am struggling to get the same pulley back on? I have the same 2006 13am762F765....there is a black metal bar in the way....did i miss detaching a spring or something..


Footer Links 1

Top