Export thread

Paul from Germany

#1

L

loewe opta

Hello all here.
Me Paul from Germany,my age 52 and i collect old Cars form the old eastern Germany from the Manufacturer Sachsenring.
Last month i bought a used Generator for my Lifting Platform,in this is a Briggs and stratton engine with 8 hp.
And i hope i found some here,on reply this i had a litte Problem.
The last Pic shows my Car,his originalpaint was silvergray.
Excuse my english .

Sincerelly Paul

DSCI4088.JPG

DSCI4089.JPG

DSCI4087.JPG

hqdefault.jpg


#2

Catherine

Catherine

Hi Paul. Happy to have you here.

Welcome from the other side of the globe! :welcome: :smile:


#3

L

loewe opta

I hope u can read my english.
On some Words i need a Programm or my big translate book.
I told u in a next Thread the problem from my Generator.
Since Paul.


#4

Catherine

Catherine

No worries. Your English is okay :smile:


#5

reynoldston

reynoldston

Other then the flywheel cover is off what is your problem? It will help a lot with the model and serial numbers in which should be stamped into the flywheel cover you have off. Maybe no spark??


#6

L

loewe opta

Spark is ok,i lost a little Spring behind the Control Bracked there be 2 Springs.
And i dont know the right Place from the smal spring thats the Problem,found she in a Corner in my hobbyroom.

U see in the Foto one Spring,and the small.
From this i need the right Place.
Mfg ---In German, Mit freundlichen Grüssen , in english --- with friendly Greetings.


DSCI4099.JPG

20161212_143130.jpg

20161212_143134.jpg


#7

L

loewe opta

DSCI0499.JPG

Attachments





#8

reynoldston

reynoldston

The spring in the picture is the governor spring. It go's between the governor arm and throttle lever. If you need a picture go to Jacks small engine parts and put your model number under B&S engines. Go to the picture links electric, 232 is called governor link ( your spring) and it runs over the 212 throttle link. The spring helps hold your governor from hunting. I hope this helps:thumbsup: Nice looking car lift


#9

L

loewe opta

The Carlift is build 1964 and can lift 2 tonns.
Here in germany all big Tools work with 380 Volt also my Lift too.
In my Barn where i had my Tools is not 380 V so i need a Generator for this.
Now i found one in a lokal newspaper ( internet) .
He had 4500 watt and the Lift 1500 thats enough for my small Car.
I will paint him new so it looks like better.
My litle Trabant i hope i can close the workshop on him,close some rustholes and welding, ready for paint.
Sincerelly Paul


#10

reynoldston

reynoldston

The car looks good in the pictures and I bet it will look better when finish. What year is it. Any older cars in our part of USA are rusted real bad because the towns salt the roads in the winter time to melt the ice. Sure don't hesitate to keep sending pictures of it :thumbsup:


#11

L

loewe opta

The Car ist build in 1964 one of the with new Design,the old Modell was rounder.
Inside--Engineroom--Engine and axles be clean and new paint.
He had some Rust holes that i must weld,after this is done he becomes his new Paint in original silvergray maybe a red Roof.
His bluemetallic paint i remove with this Tool u need in ur kitchen its for the Ceran field a little Knife u know.
Now his surface is grinding with 200 Paper and some scratches closed with epoxiputty,and he waits for his Paint.
Ist cold to make a paintjob rightnow i must wait a little.
Next step the Brakes must new some brakelines and Cylinder.

Here u can see some Videos from me and my Hobby.

https://www.youtube.com/watch?v=gGba4Pr-dB0
since Paul


#12

2smoked

2smoked

loewe opta said:
The Car ist build in 1964 one of the with new Design,the old Modell was rounder.
Inside--Engineroom--Engine and axles be clean and new paint.
He had some Rust holes that i must weld,after this is done he becomes his new Paint in original silvergray maybe a red Roof.
His bluemetallic paint i remove with this Tool u need in ur kitchen its for the Ceran field a little Knife u know.
Now his surface is grinding with 200 Paper and some scratches closed with epoxiputty,and he waits for his Paint.
Ist cold to make a paintjob rightnow i must wait a little.
Next step the Brakes must new some brakelines and Cylinder.

Here u can see some Videos from me and my Hobby.

https://www.youtube.com/watch?v=gGba4Pr-dB0
since Paul
Click to expand...
WOW!! That is a very different car. I noticed that it has a 2 cylinder air cooled 2 stroke engine. How many cubic centimeters does it displace? It looks easy to work on.


Footer Links 1

Top