I have a 2013 ltx1050 cub cadet that I recently changed oil and when I tried to start, nothing! lights won't come on my meter either. I replaced the fuse and the solenoid, checked for any loose wires. Any ideas? Thanks in advance
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
No power to tractor
- Thread starter RRoelandt
- Start date
More options
Export threadYes my battery reads 13vHave you checked battery voltage. could be a mystery sudden death of the battery.
No, after I changed the oil I started it up to get oil into the filter to get an accurate reading. It's a head scratcher I think I have to get better at how to track the power. Thanks for your responseDid you power wash it while you were changing the oil?
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
bypass the battery cables with a pair of jumpers
One at a time
neg directly to engine
Pos directly to solenoid
Let us know what happenes.
One at a time
neg directly to engine
Pos directly to solenoid
Let us know what happenes.
Negative to where on the engine? The positive already is at the solenoidbypass the battery cables with a pair of jumpers
One at a time
neg directly to engine
Pos directly to solenoid
Let us know what happenes.
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
Anywhere that is metal
I generally use the drain plug, the top of one of the engine mounting bolts , if the blower housing is off to one of the cylinder fins
Just not the carby or any plastic piece even the muffler if you are desperate but wobble the jaws a bit to clean the rust off .
Pos needs to be a jumper not the battery cable because that is what we are testing by doing this
I generally use the drain plug, the top of one of the engine mounting bolts , if the blower housing is off to one of the cylinder fins
Just not the carby or any plastic piece even the muffler if you are desperate but wobble the jaws a bit to clean the rust off .
Pos needs to be a jumper not the battery cable because that is what we are testing by doing this