No Ignition

[Redsparky]

I have a Cub-Cadet 2186, It was starting fine all day with no problem. I went to start it and as it tried to roll it stopped as if no power to the switch.
I tried to jumper the starter with the switch on but got nothing..Any Idea's what to look for..I checked the two 25 amp fuses they were ok..

 

[reynoldston]

I don't know how you are jumping your wires, but if you get good amperage not voltage to the starter and it doesn't work there is something wrong with the starter.

 

[EngineMan]

You should have power at the fuse(s) check, then B on the key switch check, out at S on key switch check, into PTO switch (orange wire) maybe.! check PTO switch, from PTO switch into interlock switch, check, out of interlock switch to solenoid, check.