Will check soon as I find my tester
[/QUOTE pulled PTO switch,Delta 6024, all Delta 6024's I can find online are 8 terminal,this one is a 7 terminal(none broke off). Connector is as follows 1r,2y,3o+ow,4bu,5yw,6empty,7+8empty,
obl. Switch as follows one side is labeled com a, com b, com c. Other side is labeled nc,nc,nc. On first side a,b,c all have spades for connector. In middle d no spade,e+f have spades.g+I have spades,h doesn't. It only plugs in one way,on the switch g has a spade(on the NC side of switch) but connector 7(which corresponds to g) has no wire there. Had previously noted switch came off a cub cadet tractor style,could this be my problem or do I need to move on to brake switch and or battery? While waiting on reply(s) headed to Walmart to get battery,cause no sir I can not say my battery just because it shows 12.6 v that it's not failing under load,have only multimeter to check it with. I do know when I stuck a wire from + battery to signal post on solenoid it energized but the motor barely tried to turn. Can't go wrong with new battery especially knowing I have another mower with a bad battery. Thanks again for all replies,if it at all appears I'm not using yawls advise,I'm trying. Keep in mind your trying to help a true Kentucky hillbilly that by the grace of God graduated high school.