I have a Sabre by John Deere.....has had a few starting problems, but I know the battery is good (recently recharged and getting a spark). But when I turn the key there is absolutely NO sound. I did a total clean on the connectors to the battery, so I know that is not it. But the lights will also not come on. I have checked the wires, wherever accessible, and I don't feel any damage to insulation, etc. I am wondering if it is something as simple as a defective safety switch in the seat. But if that were the problem, would it still prevent the lights from coming on? Any suggestions would be helpful.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
No Click, no lights
- Thread starter Braskill
- Start date
More options
Export threadshiftsuper175607
Lawn Addict
- Joined
- Sep 11, 2013
- Threads
- 10
- Messages
- 1,000
I have a Sabre by John Deere.....has had a few starting problems, but I know the battery is good (recently recharged and getting a spark). But when I turn the key there is absolutely NO sound. I did a total clean on the connectors to the battery, so I know that is not it. But the lights will also not come on. I have checked the wires, wherever accessible, and I don't feel any damage to insulation, etc. I am wondering if it is something as simple as a defective safety switch in the seat. But if that were the problem, would it still prevent the lights from coming on? Any suggestions would be helpful.
Can you try and jump start it?...the battery could still be bad...bad cell...broken circuit.
William Heck
Forum Newbie
- Joined
- Jul 30, 2017
- Threads
- 1
- Messages
- 4
No clicks lights are bright
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
THis is a double post and OP has done the right thing and started a new thread.