Thanks for your reply. I have 261961 bushing as that's what the online parts list called for.The closest to the Briggs finish reamer for 5/16 valves is a 8 mm. I actually measure .3145" on my finish reamer. It is also a LH twist version which might be throw calipers off a tad. Note if you installed Briggs 230655 bushing , it does not require finish reaming.
All I can provide is the size of the finish reamer provided by Briggs which is .3145 [7.98mm].Thanks for your reply. I have 261961 bushing as that's what the online parts list called for.
So a .3125 reamer is too small? Never replaced one before and all I know comes from youtube.
Got it, 8mm it will be. Thanks again!All I can provide is the size of the finish reamer provided by Briggs which is .3145 [7.98mm].
Thank you for the good reading!Google Drive: Sign-in
Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use).docs.google.com