Need mount Help

W

Wiron

Forum Newbie
I need a mounting bracket to attach blower
The tractor is YT 3000 ( 917. 28852 )
Blower is 486.248463
 

Attachments

  • B19434A3-D294-4CE3-9BE9-AF1DC2D06AC2.jpeg
    B19434A3-D294-4CE3-9BE9-AF1DC2D06AC2.jpeg
    124.3 KB · Views: 7
I don’t think you need a bracket to mount that blower on that tractor. Do you have a large pin sticking out on the front of each side of the frame? The notches on the blower should fit over these pins. If I’m wrong post back with pictures of the sides of the frame and model numbers of both the tractor and blower.
 
No pin
 

Attachments

  • 09C9F5E4-6E16-4B20-AEDD-D17C7572BC09.jpeg
    09C9F5E4-6E16-4B20-AEDD-D17C7572BC09.jpeg
    24.5 KB · Views: 4
  • E0CA6679-FF9B-4FBD-A1BA-F536B91052F7.jpeg
    E0CA6679-FF9B-4FBD-A1BA-F536B91052F7.jpeg
    32 KB · Views: 3
  • ABE20BB2-2133-4AA8-ACB0-CDA7B7BF5F16.jpeg
    ABE20BB2-2133-4AA8-ACB0-CDA7B7BF5F16.jpeg
    27.1 KB · Views: 1
Go to Sears Parts Direct with this model number, 486248463. There you will be able to download a manual for your blower. Then you will be able to figure out which parts you are missing and what you will need to order. You are correct, either someone removed parts or you purchased the tractor and blower separately, not getting all the blower parts.
 
Been collecting parts. Can only afford to get parts here & there thx I’ll try looking them up.
 
You must log in or register to reply here.
Back
Top