Hello all. New member here. Was going to change the filters and oil on the hydros (ZT-3400). Jacked it up and it looks like the left side will not be any problem, however the right side I don't know if I can even get a wrench on the plug. It is an Allen plug. Even if I can get the plug out the fitting that comes in the kit would not thread in because of clearance issues. Anyone been through this problem? Thanks.
MZ5225ZT hydros help needed
- Thread starter bweb
- Start date
Take out the plug leave it out and fill the hydro through the expansion tank. It will hold about 2 quarts. You can then finish filling the hydros after you put the plug back in. You will see bubbles coming out of the hydros into the tank until full.
