MTD Drag Link

[davbell22602]

16.5 Lhead twin Briggs and G series/42in deck. 7 speed shift on the go. Someone changed the seat so no model number.

How does the drag link go this riding mower? I'm talking about the rod that mounts on top the right wheel spindle and goes the steering gear. I think someone put it on where the bend is cutting into part of the body/frame.

 

[Carscw]

Take it off and turn it around It is on backwards
You can go to MTDPARTS.com. And find your model #

Sent from my iPhone using LMF

 

[Carscw]

Oh one more thing it looks like the bend could be a little more than it should be. Does the mower turn real sharp one way and not good the other way

Sent from my iPhone using LMF

 

[davbell22602]

Take it off and turn it around It is on backwards
You can go to MTDPARTS.com. And find your model #

Sent from my iPhone using LMF

No model number on this at all.

Oh one more thing it looks like the bend could be a little more than it should be. Does the mower turn real sharp one way and not good the other way

Sent from my iPhone using LMF

I can turn the wheels one way and it stops half way through cause the drag link hits the body/frame. Havent noticed if it turns too sharp though the one way.

 

[Carscw]

Flip the rod just for fun bet it works better
I know you don't have your model # but the web site will walk you threw a few steps to help you get your model #
I love old MTDs and they never have the model #s

Sent from my iPhone using LMF

 

[davbell22602]

Flip the rod just for fun bet it works better
I know you don't have your model # but the web site will walk you threw a few steps to help you get your model #
I love old MTDs and they never have the model #s

Sent from my iPhone using LMF

Couldnt find the model. I know I have a 96 Briggs Lhead twin on it and 42in deck. Yard machine rider also.