Mower Deck & Grass Baffle Metal

Skippydiesel

Well-Known Member
Joined
Nov 29, 2020
Messages
527
I am repairing some wear & tear on my Hustler Super Z mower deck grass baffles, which are warn & cracked in places. It occurred to me that repairing with mild steel sheet may not be the best material.

My question are;
  • What is the steel used in my mower deck?
  • Something special to resist corrosion & abrasion or just regular mild steel?
:devilish:
 
Regular mild steel works. Just depends on you have available. I use lawn edging for the wider pieces here as that what I got available. Galvanized metals produce toxic fumes when welded.
 
Once you get the repairs done, coat all the metal and painted surfaces with POR 15. Make sure you sand and wire brush all surfaces so the POR 15 paint can hold on good.

Some of my decks were brought back from the dead and still doing the job very well.
 
Once you get the repairs done, coat all the metal and painted surfaces with POR 15. Make sure you sand and wire brush all surfaces so the POR 15 paint can hold on good.

Some of my decks were brought back from the dead and still doing the job very well.
POR 15 works well for metal gas tanks that are rusty. Never thought about using on underside of deck.
 
Hello Tiger,

At the moment I am actually trying a product called Red Coat on one of my older JD generator tanks to see how well it works. I have not used the POR 15 tank sealer recently, but it works well. They do make more than fuel tank sealer.

Basically, POR stand for Paint Over Rust. It has been around for many years in the automotive body and chassis restoration industry. The surface preparation has to be performed correctly

Too many people fail to prep the metal or painted surfaces and then quickly fault the product when things don't go as expected.
 
Back
Top