BlazingTiger
Forum Newbie
- Joined
- Feb 9, 2023
- Threads
- 1
- Messages
- 5
Is there anyway to adjust these valves? I turned by hand till 1 valve was compressed and checked the other and there is no gap. Mower doesn't start, it clicks, turns if it feels like it for a little then stops. I thought maybe the battery wasn't strong enough to turn it but its reading 10v so thinking valves are too tight (zero gap even when open) not allowing proper motor operation? Can't even fit a 0.0015" feeler. Sorry, don't know much about motors and all that and can't find what I need on the internet. Forums have always been helpful in the past so that's why I'm here.
But, I also did have the shop pick it up and they charged the battery and replaced some wires and then it started right up so maybe it is the battery but once it sat for a week it didn't start again. Already bought a battery charger coming today, but I'm thinking the valves having no clearance could also be an issue?
Thanks for any advice/help! It is much appreciated!
But, I also did have the shop pick it up and they charged the battery and replaced some wires and then it started right up so maybe it is the battery but once it sat for a week it didn't start again. Already bought a battery charger coming today, but I'm thinking the valves having no clearance could also be an issue?
Thanks for any advice/help! It is much appreciated!