Export thread

LT1045 - 2008 - WILL NOT FREE WHEEL WITH TRANSMISSION ROD PULLED OUT.

#1

F

FLEA

My 2008 LT1045 will not free wheel(engine stopped and have to change out carb). I need to push it back underneath my shed to get it out of the elements. When I pull out to release rod on the transmission it will not budge. Is there a secret that I need to know or is there other issues that I may not be aware of?


#2

1982-4502

1982-4502

FLEA said:
My 2008 LT1045 will not free wheel(engine stopped and have to change out carb). I need to push it back underneath my shed to get it out of the elements. When I pull out to release rod on the transmission it will not budge. Is there a secret that I need to know or is there other issues that I may not be aware of?
Click to expand...

Is the clutch in,and brake on. wont roll with clutch locked.


#3

F

FLEA

1982-4502 said:
Is the clutch in,and brake on. wont roll with clutch locked.
Click to expand...

No sir....everything is free. Very confusing. I looked under the rear end and the spring attaching the rod is pulling back on the release mechanism, but still not able to push mower.


#4

B

bertsmobile1

Jack the mower up and try to turn one of the rear wheels.
If it turns and the other one turns in the opposite direction your brake is locked on.
Should this be the case, remove the wheel and disassemble the brake, cleaning all the debris from around the disc.


Footer Links 1

Top