Lowering the blade on a walk behind

[Rickcin]

I just started using an eXmak 36 inch Metro and I was wondering how to lower the blades a quarter or half inch and if it is a big deal ?

I can see the blade shafts are exposed, stick up through the pulley cover plate and looks like they have washers under the nuts.

 

[KennyV]

You raise Or lower the mower deck by moving Front Wheel spacers above or below their mounting bracket.... You can use the spacers provided OR go to a hardware store and get thinner spacers, to allow a smaller movement Up or Down... :smile:KennyV

 

[rander]

You can find the instructions for changing blade height and changing cutting height in the eXmark owners manual available for down loading at the eXmark website.

http://www.exmark.com/pdfs/850610.pdf