blackchevy3de
Active Member
Ihave a self propelled md 8073 im looking for the drive control lever from the wheel to the control rod, and the parts that hold the two together thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
LAWN BOY MODEL #8073 PART NEEDED
- Thread starter blackchevy3de
- Start date
Hello,
I think the parts you're looking for are still available from Lawn-boy.
https://www.shoplawnboy.com/Comergent/en/US/adirect/Toro?cmd=ToroOnlineDrawingsPartSearch
Regards
Jeff
I think the parts you're looking for are still available from Lawn-boy.
https://www.shoplawnboy.com/Comergent/en/US/adirect/Toro?cmd=ToroOnlineDrawingsPartSearch
Regards
Jeff
blackchevy3de
Active Member
Hello,
I think the parts you're looking for are still available from Lawn-boy.
https://www.shoplawnboy.com/Comergent/en/US/adirect/Toro?cmd=ToroOnlineDrawingsPartSearch
Regards
Jeff
Thanks Jeff they are but one company wants #172.00 dollars and another wanted 200.00, I picked up a used one for 25.00
blackchevy3de
Active Member
Yeah, they did seem like a lot for just a metal rod, good you found a used one.
Regards
Jeff
feff I found it on ebay the rod and the clamp and bolt that holds the rods together for 17.95 with free shipping