Export thread

I have a old Lawn-Boy 7264 with a SN starting with 7. Runs great but the primer button doesn't work so I have to squirt a little gas in through the carb to start it. Looks like the primer is integrated into the shroud/gas tank. Can it be replaced separately or do I need to replace that whole top? Anyone have PNs or a source for such a thing?

lawn boy part number 607310. Primer bulb. You may need to replace the tubing too. there is a bolt that holds the primer base to the shroud. loosen that and the primer base should come right out. put the new primer back on the base reinstall the screw under the shroud. connect the tubing to the primer base and carb and you are in business. Ebay has them all day long. good luck!

Thanks for the info

Ok the bulb is fine, hose is shot. Is there a specific pn for that? I'm gonna try my local hw store tomorrow.

Ltg53207 said:

Ok the bulb is fine, hose is shot. Is there a specific pn for that? I'm gonna try my local hw store tomorrow.

Click to expand...

That tubing is a generic item -- you don't need a part number. Just get fuel line with the correct inside diameter.