My throttle does no engine speed change from idle to full throttle. The governor is set okay, the throttle cable moves the throttle linkage on the carb from idle to full. I can move the governor lever and the engine will speed up and slow down, but the throttle lever fails to make a change in speed.
Kohler Command CV22 throttle linkage no response
I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies. https://mymowerparts.com/pdf/Kohler...d-CV17-CV18-CV20-CV22-CV25-CV22-CV23-CV26.pdf
- Joined
- Sep 7, 2024
- Threads
- 19
- Messages
- 1,686
Look at the governor arm pull spring. It is operated by the mechanism the throttle cable is attached to. The cable mounts to the outside and the spring is attached on the other side (inside).
Craftsman Garage
Well-Known Member
- Joined
- May 2, 2021
- Threads
- 42
- Messages
- 541
Incorrect setup, cable needs to be set, or need heavier throttle spring.